BIG 70 LB TRANSFORMER
JOIN THE S.W.A.T. TEAM
3 PROFITABLE REASONS TO OWN A S.W.A.T. WELDER
More than 80% of welding can be done with a S.W.A.T.
Only a Spot Weld looks like a Spot Weld.
Spot Welds are Strong
S.W.A.T. WELDER CONTROLS
|Power Off-On Switch: With Power-On Indicator Light.
Weld Timer Control: Infinitely Variable 0 to 2 Seconds, plusManual Mode For The Experienced Technicians.
Weld Power Control: Controls Welding Voltage Between 4 and 10 Volts.
Smooth, Precise, Repeatable Power Control Is A Hallmark Of The S.W.A.T. Welder Power Source.
Weld Power Indicator Light:
Washable Decal: Has Complete Instructions Printed On Front Panel.
5 YEAR WARRANTY ON ALL ELECTRONICS
S.W.A.T. WELDER QUALITY DESIGN AND CONSTRUCTION
Mechanical features that make the S.W.A.T. Welder a great value
|1. Red and white 16 gauge steel cabinet, big 8 inch wheels and 4 inch casters, with a stretched wheelbase makes the S.W.A.T. Welder very portable.
2. Left & right welding cable storage brackets make welding cables easy to wrap up.
3. Extra tall handle makes the welder easy to push around the shop.
4. The 50 foot long 10/3 Power Cord makes it easy to reach outlets in the shop without extension cord hassles.
5. TITE-SPOT Pliers will do 70% to 80% of your welding.
6. TITE-SPOT Cool Cords will do 5% to 10% of your welding.
|7. TITE-SPOT Super Utility Kit is the perfect tool for heating, shrinking and stud welding.
8. This tool is designed for years of heavy-duty service.The TITE-SPOT S.W.A.T. Welder is a multi-tasking tool that will be used daily in your body shop. Vehicles are Spot Welded at the factory. You can duplicate this OEM appearance in repairing vehicles. Your shop can complete the spot welding process on today’s vehicles in less time (a wheelhouse can be prepared, welded and primed in 6 to 7 minutes using the TITE-SPOT), and spend less time protecting the vehicle from the dangers of fire from sparks. The “New Car” appearance of a spot weld installed with a TITE-SPOT is impressive.
BIG 70 POUND TRANSFORMER
|The heart of the S.W.A.T. Welder is the extended service transformer. This 10 volt transformer has an extended duty cycle because of its thermal mass (53 pounds of transformer laminate)BIGGER than any competitor. Oversized copper windings (6.5 pounds of #8 square wire on the primary, and 8 pounds of 1 inch by 3/8 inch bar on the secondary) minimize heat-build in heavy-duty use.||INPUT POWER
208/240 Volt Single Phase – 60 hz
50 Amp Breaker Required
Rated 8.7 KVA
50 hz Special Order
480 Volt Special OrderCare must be taken to assure sufficient wiring is in the building. Inadequate wiring can be a safety problem. A 10 percent voltage drop at the receptacle is unacceptable.OUTPUT POWER
4 to 10 Volts – Over 4500 Amps
Using ANSI Standards
TITE-SPOT features a 5-Year Warranty
on this big 70 pound transformer and all the electronics
THE BEST QUALITY AT ANY PRICE – PICK THE PACKAGE THAT FITS YOUR NEEDS
With TITE-SPOT Pliers
TITE-SPOT Cool Cords