'

DiGi S.W.A.T

DiGi S.W.A.T. Welder TM

Get the printable version

DIGITAL
CONTROLS


PREHEAT TIMER


WELD VERIFICATION

BIG 70 LB TRANSFORMER
TITE-SPOT PLIERS
COOL CORDS
SUPER UTILITY KIT
TRAINING VIDEO

  50′ Power Cord
  10″ Diameter Pneumatic Tires
  5″ Diameter Front Casters
  Extended Wheelbase
  Welding Cable Brackets
  Tall Easy Push Handle
  16 Gauge Steel Case
  Red & White Finish
  Stainless Steel Front
  Transformer is Fan Cooled
  Instructions on Front Panel
  5 Year Transformer Warranty
  5 Year Electronics Warranty
  1 Year Cool Cords Warranty
  1 Year TITE-SPOT Pliers Warranty
  Foot Pedal Switch for
  TITE-SPOT Pliers

AIR BLOCK TOOL CADDY with

  Air Control Valve
  Spare Standard Welding Tips
  Hi-LO Welding Tips
  Door Panel Tip
  Tip Sharpening Tool

Digital Spot Welding
Attenuated Transformer


FREE Training Video 

3 PROFITABLE REASONS TO OWN A DiGi S.W.A.T.

SPEED

  More than 80% of welding can
  be done with a DiGi S.W.A.T.
  Plus: weld pull studs
  Plus: heating and shrinking

APPEARANCE

  Only a Spot Weld looks like
  a Spot Weld.
  All the Auto Makers use
  Spot Welding.

SAFETY

  Spot Welds are Strong
  Safest form of welding for
  vehicle, shop and technician.
NO SPATTER!

DiGi S.W.A.T. PUSH BUTTON CONTROLS

PROGRAM SELECT: With just the push of a button, adjust both timers and weld power setting to one of ten welding programs. Weld program list is printed on front panel.
DIGITAL WELDING POWER Control:Set welding voltage from 4 to 10 volts. This setting will accommodate 18 ga to 30 ga steel or galvanized steel.
DIGITAL WELDING TIMER Control:Sets weld time from 0 to 99 cycles*. Each weld cycle is validated before timer is incremented, insuring uniformity of every weld.
DIGITAL PREHEAT TIMER Control: Sets preheat time from 0 to 99 cycles*. Preheating the weld zone eliminates expulsion or blow out.
Preheat time validation: Each preheat cycle is verified for power before preheat timer is incremented.
Washable Decal: Has complete instructions and protects switches from dirt and moisture.

*60 cycles equals one second
DiGi S.W.A.T. WELDER

FOOL-PROOF SPOT WELDING

DiGi S.W.A.T.
features S.W.A.T.-TRONICS

S.W.A.T.-TRONICS features are exclusive to the DiGi S.W.A.T. Welder. No other body shop welder has these features!
S.W.A.T.-TRONICS controls the big 70 pound transformer with a Motorola HC11 microcontroller. The Digital controls are as easy to use as a desktop calculator, just pressing a button sets time and/or power.
S.W.A.T.-TRONICS Digital Preheat Timer Control makes easy work out of auto body repair welding. Preheating warms the metal with low power burning the primers, sealers, rustproofing, or even rust from between the layers of steel. This heating also lets the

TITE-SOPT Welding Pliers squeeze the metal together for a perfect fit.
S.W.A.T.-TRONICS lets the pre-heat timer “tick” ONLY if the proper amount of preheat current is flowing. This feature prepares the weld zone for welding.
S.W.A.T.-TRONICS lets the welding timer “tick” ONLY if the proper amount of welding current is flowing, giving you uniform welds every time. When the DiGi S.W.A.T weld timer fires, you get no expulsion and perfect welds.

The MOST Sophisticated Controller
Yet It’s THE EASIEST TO USE!

DiGi S.W.A.T. CONTROLS MAKE WELDING CABLES RUN COOLER!!

BIG 70 POUND TRANSFORMER

The Heart of the DiGi S.W.A.T. Welder is the extended service transformer.The Heart of the DiGi S.W.A.T. Welder is the extended service transformer. This 10 volt transformer has an extended duty cycle because of its thermal mass (53 pounds of transformer laminate) BIGGER than any competitor. Oversized copper windings (6.5 pounds of #8 square wire on the primary, and 8 pounds of 1 inch by 3/8 inch bar on the secondary) minimize heat-build in heavy-duty use.

INPUT POWER

  208/240 Volt Single Phase – 60 hz
  50 Amp Breaker Required
  Rated 8.7 KVA
  50 hz Special Order
  480 Volt Special OrderCare must be taken to assure sufficient wiring is in the building. Inadequate wiring can be a safety problem. A 10 percent of voltage drop at the receptacle is unacceptable.

 OUTPUT POWER

  4 to 10 Volts – Over 4500 Amps
  Using ANSI Standards

TITE-SPOT features a 5-Year Warranty
on this big 70 pound transformer and all the electronics

THE BEST QUALITY AT ANY PRICE – PICK THE PACKAGE THAT FITS YOUR NEEDS

DiGi S.W.A.T.
Power Source

DiGi S.W.A.T. Power Source
DiGi S.W.A.T.
& TITE-SPOT Pliers

DiGi S.W.A.T. Pliers
DiGi S.W.A.T.& TITE-SPOT
Cool Cords

Cool Cords
Complete DiGi S.W.A.T.
Welder

Complete DiGi S.W.A.T.